Posts Tagged ‘worm bin’

Setting up your Worm Bed

Friday, December 3rd, 2010

If you’re looking for ways on how to set-up your own worm bed, then you’re reading the right material! When it comes to particular things such as how to make a worm bed , all you’ll need to follow is a few essential things. Read on further to get more tips on how to create an organic bed for your compost pals.

It is easy how to build a worm bed. You can start by preparing the materials that you’ll be using. Clearly in this set-up, you’ll need strips of newspapers because you will have to fill (about ½ to ¾ full) your worm bin later on with these stuff. Now it doesn’t end there. You’ll need to soak these strips into some water. You’re going to have to squeeze all the excess water from the newspaper before you can place these inside the worm composter.

Apart from the presoaked newspaper strips (or shreds), you can also put in some soil, as your other worm bedding materials. You may simply sprinkle some on top of the strips. Take note that it’s good to provide your worms with some soil as this material helps them digest their food intake. You should know that worms have no teeth, so they simply can’t chew anything.

Aside from newspaper strips and soil, you can also put in some organic wastes. These organic scraps can come straight from your regularly generated household wastes, and can be in the form of kitchen scraps and garden wastes. Worm bedding can simply be composed of presoaked peat moss, coconut coir, crushed egg shells, and some coffee grounds. Both crushed egg shells and coffee grounds can also serve as a food source for your worms.

But let’s not forget the worm composter that you’ll be using to store your worm bed construction. The size of the worm bin varies so you have to know how many worms are intended to be raised. Other than that, you can start with a medium-sized composter; and start with about a pound worth of worms that can typically amount to more or less 1,200 pieces (you can buy red worms or nightcrawler worms at local bait shops or through worm farms online). You can either choose untreated wood or  a plastic container, that comes with a lid. If you’re adventurous enough, you can even use an old toilet bowl for worm composting.

Also never forget to include in your worm bed plans the holes needed for your composter. Your worm bin should have ventilation and aeration holes drilled all over it. It only means that you’re going to have to drill holes on the top and base area of the bin. Without holes on the composter, the worm bed can potentially get spoiled. The bin does in fact need to be rid of excess water, and be supplied with an ongoing supply of oxygen. Your worms do in fact, need oxygen as well, to be able to breathe and survive. And if the bedding is left too wet, your worms can likely drown from this. So always remember these essentials so that you won’t have to deal with the probable problems sooner or later.

GardenWorms.com recommends the Kitchen Compost Carrier

kitchen compost carrier

For only $24.95, get the Kitchen Compost Carrier for its fitting capacity of 2.4 US Gallons. You can simply put it under the sink or anywhere you want. It’s that easy to move and place around. It’s also the perfect tool for all those who are really into composting. With its thick charcoal filter, you no longer have to worry about getting foul smells from your compost, as it keeps the organic scraps odor-free. So get yours today!

To know more about the product, check the Kitchen Compost Carrier here.

Starting your own Wood Worm Bin Construction

Sunday, July 11th, 2010
There are a variety of readily available plastic worm bins in the market today; and worm containers made out of wood are also amongst gardeners’ choices. But by choosing to build your own, you not only experience the craft of making it, you also get to assemble a worm bin that will set you apart from all the commercially made containers in the market. Create a bin for your worms that’s specifically designed for worm composting. There are plenty of facts about vermicomposting that you may look up online, to further understand the real need for worm containers. And starting your own wood worm bin construction at home can be also done at your own convenience.
Before proceeding to your wood worm bin construction, consider these first: bin size preference, materials to use, and a good ventilation and drainage system. Wood is a good material, as it provides better aeration and insulation, as compared to plastic-made containers.
Step 1: Plan-out your desired size for the worm bin. You can modify the worm bin size as you base it on the quantity of organic materials that you aim to compost. To calculate for that, you’ll need 1 square foot of surface area (for your bin) for every pound of waste that is put in and casted. Homemade worm bins should be no deeper than 8 to 12 inches, as it enables the composting worms to function properly. This will allow them to feed on organic materials on the soil surface and to take advantage of aeration. Worms climb to top of bin, so make sure that the bin’s dimensions encourages this especially after they’ve deposited their castings.
Step 2: Gather your materials for your worm composting bin. You’ll need a power saw or hand saw, a hammer, a pencil and measuring tape, some glue, a square, a drill (with 1/4″ and 3/32″ bits), and some sandpaper. Also use gears for your eyes, ear and body.  You can build your bin by using a 4-by-8 foot of sheet plywood. Your plywood should also be in exterior grade and should be non-treated (as chemicals may eventually cause a leak inside the bin). You can use this for the bin’s base, lid, sides and ends. You can start assembling all the pieces together by putting glue on it first, before securing it with nails.
Dimensions for the materials:
Bin – 16 in.(H) x 2ft(W) x 4ft(L)
Base and Lid – 2-by-4ft; with sides that measure 16in.x4 ft; ends 16in.x24 in.
Cleats – two-by-fours (screw these into the interior corners of the sides and ends)
Step 3: To create an effective ventilation and aeration system for your red worms, you must drill about 12 (3/8-in.) holes on the bin’s base. Always monitor your bin to check for sufficient aeration even after you’ve placed your bedding, wastes and your worms. For your wood worm bin construction, elevate your bin by giving it legs or placing it on top of bricks. Also make sure to place a tray underneath for collecting leachate drips from the bin. And that’s it!
GardenWorms.com recommends the Con o Worms
For just $119, let Con o Worms provide you with an instant way of turning your kitchen scraps into valuable garden compost. It’s quick, odorless and space efficient; and it’s ideal for new timers!
To know more about the product, check the Con o Worms here.

wooden worm bin constructionThere are a variety of readily available plastic worm bins in the market today; and worm containers made out of wood are also amongst gardeners’ choices. But by choosing to build your own, you not only experience the craft of making it, you also get to assemble a worm bin that will set you apart from all the commercially made containers in the market. Create a bin for your worms that’s specifically designed for worm composting. There are plenty of facts about vermicomposting that you may look up online, to further understand the real need for worm containers. And starting your own wood worm bin construction at home can be also done at your own convenience.

Before proceeding to your wood worm bin construction, consider these first: bin size preference, materials to use, and a good ventilation and drainage system. Wood is a good material, as it provides better aeration and insulation, as compared to plastic-made containers.

Step 1: Plan-out your desired size for the worm bin. You can modify the worm bin size as you base it on the quantity of organic materials that you aim to compost. To calculate for that, you’ll need 1 square foot of surface area (for your bin) for every pound of waste that is put in and casted. Homemade worm bins should be no deeper than 8 to 12 inches, as it enables the composting worms to function properly. This will allow them to feed on organic materials on the soil surface and to take advantage of aeration. Worms climb to top of bin, so make sure that the bin’s dimensions encourages this especially after they’ve deposited their castings.

Step 2: Gather your materials for your worm composting bin. You’ll need a power saw or hand saw, a hammer, a pencil and measuring tape, some glue, a square, a drill (with 1/4″ and 3/32″ bits), and some sandpaper. Also use gears for your eyes, ear and body.  You can build your bin by using a 4-by-8 foot of sheet plywood. Your plywood should also be in exterior grade and should be non-treated (as chemicals may eventually cause a leak inside the bin). You can use this for the bin’s base, lid, sides and ends. You can start assembling all the pieces together by putting glue on it first, before securing it with nails.

Dimensions for the materials:

  • Bin – 16 in.(H) x 2ft(W) x 4ft(L)
  • Base and Lid – 2-by-4ft; with sides that measure 16in.x4 ft; ends 16in.x24 in.
  • Cleats – two-by-fours (screw these into the interior corners of the sides and ends)

Step 3: To create an effective ventilation and aeration system for your red worms, you must drill about 12 (3/8-in.) holes on the bin’s base. Always monitor your bin to check for sufficient aeration even after you’ve placed your bedding, wastes and your worms. For your wood worm bin construction, elevate your bin by giving it legs or placing it on top of bricks. Also make sure to place a tray underneath for collecting leachate drips from the bin. And that’s it!

GardenWorms.com recommends the Can-o-Worms

can-o-worms

For just $119, let Can-o-Worms provide you with an instant way of turning your kitchen scraps into valuable garden compost. It’s quick, odorless and space efficient; and it’s ideal for new timers!

To know more about the product, check the Can-o-Worms here.

The Worm Factory

Wednesday, May 5th, 2010

greenwfThere’s no better way to make your worm composting adventure better than by using the Worm Factory.  Professionals can testify to how well this product is because it’s definitely better in many ways as compared to other brands.

Worm Factory can be availed anytime you feel using it because it is manufactured all year round.  If you are just starting, you can first buy the three layer bin and if you eventually enjoy the work, have the 7-tray bin.  Worm factory is especially made for those who have limited space at home.  The 3-layer bin only measures 16″ x 16″ x 21″ so you are sure that it won’t eat much of your space at home.  Also, with the 7-tray bin, you know very well that you can have as much composting worms as you want because it can house 8,000-12,000 worms.  You can just imagine the amount of organic fertilizer that you can get from that number of composting worms.  It is also suitable for apartments because it is odor free.  It also has a worm tea collector tray.

Another rationale behind the expandable tray is for easy harvesting.  You will have to settle the worms at the first layer and when they have already exhausted their foods, they will by instinct climb the second layer.  That way, their castings will be left on the first tray for you to harvest.  It is very convenient, isn’t it?  Instead of you having to transfer the worms using your hand just to separate them from their waste, they will already do it on their own.  Most of all, with Worm Factory, you can expect 100% natural compost.


How to Build a Vermicompost Bin

Tuesday, February 23rd, 2010

binVermicomposting is never complete without the composting bin.  This is where the Red Wiggler worms (recommended composting worms) will stay and produce that dark, nutrient-rich soil amendment for your plants.

You can buy commercial vermicompost bin like the Worm Factory, but if you have more spared time, you can do it yourself.  Just prepare a clean container which is around 6 inches in depth and the size would depend on how many worms you will place in it.  The color as much as possible should be dark.  Also prepare newspapers, magazines cardboards and grass cuttings if you have.

First, drill holes in the container. You can have around 20 -30 quarter inch holes at the bottom.  You can also do this at the sides of the bin.  This will serve as the drainage and at the same time ventilation system of the whole bin.  Red Wiggler worms need air and oxygen so holes are really important.

Once set, have the newspapers and magazines cut into strips.  Soak them into water to make the bedding moist but don’t allow it to be too soggy.  You can then place those shredded newspapers in the bin.  You may also add a cardboard at the top once you settle the newspapers because composting worms love to feed on moist cardboards.

Note that you are to situate the vermicompost bin in a cool area.  You may have it in your garage, basement, under the kitchen sink or anywhere shady.  Do not expose the worms to too much light and a temperature of 50-85 degrees Fahrenheit is advisable.

That’s all that you have to do.  A vermicompost bin is not hard to make; it’s not also expensive so might as well do it rather than buy it.

You might also be interested in our other post about :

How to Make a Composter or a Compost Tumbler